Communicate with Supplier? Supplier
Bella Ms. Bella
What can I do for you?
Chat Now Contact Supplier
 Tel:86-531-68801308 Email:weili009@weiliglass.com
Home > Products > Insulating Glass Production Line > Outside Assembly Flat Press Production Line > 2.2m Auto-Insulating Glass Outside Assembly Production Line
2.2m Auto-Insulating Glass Outside Assembly Production Line
2.2m Auto-Insulating Glass Outside Assembly Production Line
2.2m Auto-Insulating Glass Outside Assembly Production Line
  • 2.2m Auto-Insulating Glass Outside Assembly Production Line
  • 2.2m Auto-Insulating Glass Outside Assembly Production Line
  • 2.2m Auto-Insulating Glass Outside Assembly Production Line

2.2m Auto-Insulating Glass Outside Assembly Production Line

    Payment Type: L/C,T/T,D/P,Western Union
    Incoterm: FOB,CFR,CIF,EXW
    Min. Order: 1 Set/Sets

Basic Info

Model No.LBW2200PB

BrandWGM

TypeInsulating Glass Production Line

CertificationUL

StructureVertical

Control SystemPLC

ConditionNew

ColorOEM

Washing Glass Thickness3-15mm

ModelLBW2200PB

Compressed Air0.8/min

Length21300mm

Width2800mm

Additional Info

Packagingplywood pallet ,plastic film, wooden package for exporting

Productivity650-700units/8hours

TransportationOcean,Land,Air

Place of OriginSHANDONG, CHINA

Supply Ability220sets/year

CertificateISO-9001/CE/SGS/UL/CSA

HS Code84649019

PortQINGDAO PORT

Payment TypeL/C,T/T,D/P,Western Union

IncotermFOB,CFR,CIF,EXW

Product Description


 2.2m  Auto-Insulating Glass Outside Assembly Production Line

 

   LBW2200PB Auto-Insulating Glass Outside Assembly Production Machine is a high-efficiency insulating glass processing equipment. This line is approved the Europe CE certification and China ISO-9001  standard and satisfy all aspects of customers’ demands with advanced technology, high production efficiency and complete functions. It is a better mass production equipment to produce insulating glass with high automatic degree, high efficiency, easiness of operation and maintenance.


 

1) The entire machine’s operation uses the man-machine contact surface (it has Chinese and English languages):

Operates direct viewing and convenient, the running status is dynamic demonstration, the frequency conversion velocity modulation; the maximum speed may amount to 45 meters/Minute.

 

2) High production efficiency: The big glass can move at the full speed, the small glass is possible to stop in storage area, and stay at the storage area temporarily, also the clean glass may input continuously.

 

3) Conserves energy interrupted type automatic operation system:

  Entire machine uses the energy conservation interrupted type automatic operation system, when glass movement to the photoelectric sensor of the end of the input conveyor, the brush, the water pump, the air blower will be start automatically, when the production is interrupted, the brush, the water pump, the air blower will automatically stop, the section of the equipment which was occupied moves in full speed, other parts which do not work are at the intelligence dormant state, so it is energy saving.

 

The back board is high density board with film


4) LOW-E glass automatic diagnosis system: it can easily know whether low-E glass putting is right or not. When is wrong, the alarm will raise the alarm, and worker can change it immediately. This system prevents the membrane of coating glass (especially the LOW-E glass) from being destroyed, the glass input conveyor station is loaded with the coating glass automatic diagnosis system, fully guaranteed the correct washing and covering of the coating glass.

low e coating detection system of insulating glass machine   

Low-E glass automatic diagnosis system

 


 

5) Washing part and drying partThis part has three pairs of brushes (the material is high -temperature nylon wire ) and a pair of sponge roller. The brushes are driven by three synchronous motors separately and the movement is stable. Three pairs of tubular rollers type of hair brushes, use High Temperature Resistant and soft nature hair brush, fully guaranteed the coating glass especially the LOW-E glass layer stratification can’t be destroyed.

 

 

 

Brushes (high-temperature nylon wire)brush can wash lowe glass for insulating glass


Bearing is SKF from Sweden

Can automatically adjust space of drag roller according to glass thickness

Stainless steel wind knife


Outside assembly section

outside assembly section of IGU machine


This section was our new design ,it can improve efficiency than assembly inside,especially to avoide the malposition questions between two or three glasses.

two wheels by two cylinder control

These two wheels are controlled by Airtac cylinder. and they can easily push the glass tightly together.



Technical parameter

Power Supply  

380V/50HZ 37.5Kw

Dimension(LxWxH)  

21300x2800x3300mm

Production quantity  

650-700IG units/8hs

Max Glass Size  

2200x3000mm

Min Glass Size

350x400mm

Washing Glass Thickness

3-15mm

Washing Glass Speed

0-10m/min

Insulating Glass Thickness

≤48mm

Transmission Glass Speed

0-45m/min

Compressed Air:

800L/min

Air Pressure:

0.7Mpa

Environment Temperaturer

7~50℃

Brush

6 pieces, include 3 LOW-E brushes



Packaging & Shipping

packing and loading container of insulating glass machine


 

Other related items of our company:


1.  Insulating Glass Production Line
2.  Low-E Coating Remover Machine 
3.  LOW-E Coating Remover Machine 
4.  Aluminum Spacer Bar Bending Machine 
5. Glass Washing Machine

 


Product Categories : Insulating Glass Production Line > Outside Assembly Flat Press Production Line

Email to this supplier
  • Ms. Bella
  • Your message must be between 20-8000 characters

Home

Phone

Skype

Inquiry